Skip to main content
All Posts By

destinytesbros

How to Clean Your Tesla Glass Windows


Getting Started

To get a good, quick, and streak-free clean on your glass is simple with just two basic items! We’re specifically talking about auto glass in the video below, but this works on all glass surfaces.

Video Guide

FAQ

Why are there streaks on my glass?

​​If you’re cleaning on a really hot day, the cleaner may be drying out too quickly on the glass leaving behind a residue. 

It could also be the towels you’re using. If your towel isn’t absorbent enough, you might NOT be picking up the dirt, grime, and cleaner, but really just smearing it around.

How To Wash Using The Two-Bucket Method


Getting Started

Washing your car takes quite a few steps, but it’s not a hard task. Let’s walk through the process for the two-bucket method – technically it’s three buckets if you wash your tires too!

Video Guide

How to Prep Before Installing Our Products


Getting Started

Before installing color change wraps (vinyl) or paint protection film (PPF) on your Tesla, you should follow these steps to properly clean your car. This will ensure a longer lasting install.

Video Guide

Tesla Jack Pads (Set of 4)


Getting Started

When lifting your Tesla with a car jack, if you don’t do it the right way, you can really jack up your Tesla. This is because the jack points on a Tesla are dangerously close to a very expensive battery pack. It would be like lifting an ICE car by its gas tank. Another thing to keep in mind is that damage caused by lifting is not covered by the warranty.

Video Guide

Skid Plate for Model 3


Getting Started

Tesla’s OEM skid plates are made out of fiberboard – which is basically a cardboard composite material. It’s easily susceptible to water damage, swelling and warping if in direct contact with the elements, and rips or tears due to hitting low curbs or driving over rough areas. There’s one in the front and one in the back covering the drive units. These aluminum skid plates have sound dampening material on the inside to decrease road noise, while fully protecting your drive train. It’s a win-win. Never again worry about hitting a puddle or bottoming out.

Video Guide

FAQ

How thick is the Skid Plate?

The metal of the skid plates is ⅛”.

Rotating Screen Mount for Model 3/Y


Getting Started

You ever wondered if there was a way to move your Model 3/Y screen just a tad bit towards you? Well, now you can with our Screen Rotating kit. This DIY kit allows you to move up to 30 degrees to the driver side and passenger side. CNC cut and made with lightweight aerospace aluminum, this kit includes everything you need to install and keep it looking factory.

Video Guide

FAQ

Do I need to know how to wire to install the rotating screen?
No. The only connection you’ll be messing with is the screen connector and it is a quick-connect.